This action table indicates in step form:
– Switch on with a press of ON/OFF button.
– Press the MENU button.
– Press INCREMENT/DECREMENT button repeat-
edly until the required parameter is accessed.
– Press the SET button to move to the value setting
fi e l d .
The INCREMENT or DECREMENT buttons are then
used to set the required value.
– Press the MENU button to return the instrument to
its Measurement Mode ready to take readings.
Display fi gures in this manual may show XXXX, YYYY
or ZZZZ as numerical values etc. these indicate that
any valid number or menu item may be displayed.
How to use this manual
Lists
Lists are arranged as follows with bulleted indents.
• 101.6 % IACS. Highest reading
• 101.2 % IACS. Mean reading
• 99.8 % IACS. Lowest reading
Notes
H
Note:
Under this heading you will fi nd special recommenda-
tions concerning measurement techniques, or refer-
ences to important information in other chapters of the
manual.
Button Operation (Keypad)
• Press: Button contact then immediate release.
• Long Press: Button contact for a period of three
seconds or more then release.
Introduction
AutoSigma 3000 Issue 04, 06/2007 1 - 5
To Next Page
Loading...
