GE AutoSigma 3000 DL - General Parameter Setting

Step Key Display
7
Increment D1 value to 6.
8
Move back to parameter
fi e l d .
9
Enter the values for D2, D3 and D4
using the same method.
10
Store these settings
in the internal memory
(Single beep will occur
when complete).
long
press
11
Return to normal mea-
surement mode (ready
for set probe routine).
3.5 General parameter setting
E.g. changing language to German (D) from Off condi-
tion.
H
Note:
This sequence is used to set any of the adjustable
menu parameters as listed in section 3.6.
General parameter setting
Preparation for operation
3 - 6
Issue 04, 06/2007 AutoSigma 3000