No of fi les Locations No of fi les Locations
14 35 39 12
15 33 40 12
16 31 41 12
17 29 42 11
18 27 43 11
19 26 44 11
20 25 45 11
21 23 46 10
22 22 47 10
23 21 48 10
24 20 49 10
25 20 50 10
Logging in a reading (general)
H
Note:
The number of fi les must have been set and there
must be space left in fi le locations for logging to be
successful, if not appropriate messages will appear on
the display.
– With a reading on the display (e.g. 99.8) that is to
be logged press SEND.
If no logging has taken place since the number of fi les
have been set, the reading will be logged into loca-
tion 1 of fi le 1 (Unless a fi le location is deliberately
selected for the reading). If previous logging has taken
place the next location will automatically be selected
to receive the new log.
Whilst logging is taking place the display will indicate:
When complete the display will revert to reading 99.8
and the next location 2 will then be automatically se-
lected for further logging.
Data logging (internal)
Operation
AutoSigma 3000 Issue 04, 06/2007 5 - 11
To Next Page
Loading...
