GE AutoSigma 3000 DL - Clearing a Fi le; Accessing a Fi le Location Containing

Clearing a fi le
With the instrument in the Measurement mode:
Step Key Display
1
Open the fi le menu.
2
Select the fi le to be
cleared. If it is not the
current fi le (i.e. the one
displayed), press arrow
keys repeatedly.
3
Clear the displayed fi le.
4
Return to Measurement
mode.
With the instrument returned to the Measurement
mode further logging or measuring can take place.
Further logged readings will automatically be placed in
location 1 of FILE YY.
Accessing a fi le location containing stored
data
With the instrument in the Measurement mode:
Step Key Display
1
Open the fi le menu.
2
Select the fi le to be ac-
cessed.
3
Return to Measurement
mode.
Normal measure-
ment display
4
Display the content from
the current fi le position.
5
Select the required posi-
tion (e.g. 14) and read
the content: 67.1.
6
Return to Measurement
mode.
Normal measure-
ment display
Data logging (internal)
Operation
AutoSigma 3000 Issue 04, 06/2007 5 - 13