9.1 EC Declaration of Conformity
We declare that the AutoSigma 3000 DL Conductivity
Meter conforms to the following European directive:
• 89/336 (Electromagnetic compatibility)
The conformity of the above-mentioned product with
the regulations of the directive 89/336 is proven by the
observance of the standard specifi cations
• EN 50081-1 Emissions
• EN 50082-1 Immunity
9.2 Manufacturer / Service address
The AutoSigma 3000 DL is manufactured by:
GE Inspection Technologies Ltd
129-135 Camp Road
St Albans, Hertfordshire, AL1 5HL
GREAT BRITAIN
Phone +44 1727 795500
Fax +44 1727 795400
The AutoSigma 3000 DL is manufactured according
to state-of-the-art methods using high-quality compo-
nents. Thorough in-process inspections or intermedi-
ate tests and a quality management system certifi ed to
DIN EN ISO 9001 ensure an optimum quality of con-
formance of the instrument.
Should you nevertheless detect an error on your in-
strument, switch the instrument off. Inform your local
GE Inspection Technologies Service indicating the er-
ror and describing it.
Keep the shipping container for any repairs possibly
required which cannot be made on the spot.
EC Declaration of Conformity
Appendix
9 - 2
Issue 04, 06/2007 AutoSigma 3000
To Next Page
Loading...
