Step Key Display
1
From “Off” select Mea-
surement mode.
2
Open the parameter
menu.
3
Step through the menu
to the LANGUAGE pa-
rameter.
4
Move across to the set-
ting fi eld.
5
Increment/Decrement to
the required language:
German.
6
Return to normal mea-
surement mode.
Normal measure-
ment display
3.6 Start-up
Normal switch on
Press ON/OFF button to bring the instrument into op-
eration in the measurement mode with the parameter
values as they were when it was last switched off.
Reset switch on
Returns the instrument to it’s default settings, not ac-
tive in User mode.
Step Key Display
1
From “Off” initialise se-
quence for access.
2
Press for start-up. Re-
lease SET button when
beep is heard.
3
Confi rm reset.
Normal measure-
ment display
Start-up
Preparation for operation
AutoSigma 3000 Issue 04, 06/2007 3 - 7
To Next Page
Loading...
