GE AutoSigma 3000 DL - Sending the Entire Memory

then revert to the fi le selection.
Sending the entire memory
With the instrument in the Measurement mode:
Step Key Display
1
Open the fi le menu.
2
Press the arrow keys
repeatedly to select all
the fi les.
3
Transfer the fi les with
a long press; after the
press the display will in-
dicate the transfer.
After transmission the display will return to ALL FILES.
H
Note:
To terminate a data transfer when in progress press
SEND. Display will respond for a short period with
then revert to fi le selection ALL FILES.
H
Note:
During data transfers all instrument operations are
suspended.
Sending serial data to an external device
External data handling devices
6 - 4
Issue 04, 06/2007 AutoSigma 3000