GE AutoSigma 3000 DL - Probe Identifi Cation

If an instrument reset is carried out the Probe data will
be returned to “5555” or “55” thus requiring the probe
code number/s to be re-entered.
3.3 Probe identifi cation
12.7 mm Probe: Dual Frequency 60 and 500 kHz
(L/H) has a four-digit code (see below).
Probe code shown  here on the display.
8 mm Probe: Single Frequency 500 kHz (H) only, has
a two-digit code.
Probe code shown  here on the display.
Probe identifi cation
Preparation for operation
3 - 4
Issue 04, 06/2007 AutoSigma 3000