APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL GE INFORMATION 123
Result: The D20MX device location now has a firmware library that
contains the SAN firmware transferred from the previous step.
3.4. Select the D20MX device created in step 1 [copied and renamed D20 device],
which is to use the intended SAN firmware in the firmware library.
3.4.1. Right-click on the D20MX device.
3.4.2. Select the Processor tab > Firmware tab > Use Firmware Type check-
box to choose the SAN0001 firmware.
Result: The Select a Firmware Type window appears. Click OK.
3.4.3. Confirm the SAN0001/SAN0002 firmware is now associated to the
D20MX device (from step 1).
To Next Page
Loading...
