GE D20MX - Page 20

20 GE INFORMATION D20MX INSTRUCTION MANUAL
CHAPTER 1: BEFORE YOU START
Table 3 provides the License Group legend.
Table 3: D20MX license group
NOTE
The license group is an option in the D20MX order code. Refer to Table 8 and Table 9 for
details. Ordering a D20MX with a particular license group option enables all applications in
that group to run on the D20MX.
B099-0 113 SNTP Client DTA The Simple Network Time Protocol (SNTP) client
application provides reasonably accurate and
reliable time synchronization.
B100-0 141 Internet Protocol Stack Configuration of the LAN
B119-1N 103 LAN Redundancy Manager Provides health and active pseudo DI points for
LAN Ports, as well as default gateway
monitoring and advanced routing
configuration.
B148-0 104 Time Zone and DST
Settings DTA
The Time Zone and DST (Daylight Saving Time)
provides a time zone and DST information to
other applications.
SAN0001 Applications
B009 401 Mailbox DTA System point conversion application.
B021N 991 DNP V3.00 DPA for D20MX The Distributed Network Protocol (DNP) DPA
enables master stations to retrieve and modify
local data using the DNP V3.00 Application
Layer Protocol.
SAN0002 Applications
B009 310‡ Mailbox DTA Same application as used in SAN0001 except it
allows you to avoid manually correcting some
configuration warnings after transferring D20
firmware containing B009 versions less than or
equal to 310.
B021N 912 Ф DNP V3.00 DPA for D20MX Same application as used in SAN0001 except it
allows you to avoid manually correcting some
configuration warnings after transferring D20
firmware containing B021 versions less than or
equal to 912.
License
Group
D20MX
Application ID
Base D20 Classic
Application Version †
Application Name Description
LIcense Group Group Description
001 D2X Classic Applications
002 Advanced Automation Applications