TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM
COVER &
NON-TAB
TRIM
Rover-Combo
■ To Discharge a Patient:
• Remove all ECG leads
from the patient.
• Select MORE MENUS.
• Select ADMIT MENU.
• Select DISCHARGE
PATIENT.
• Turn the Trim Knob to move
the cursor in front of the
desired discharge option and
press to select:
– Return: Exit to Main
Menu.
– Monitor: Discharges only
the bedside monitor.
– Telemetry: Discharges
patient from telemetry.
– Both: Discharges both the
monitor and telemetry.
NOTE: When discharging ONLY the bedside monitor, all stored
vital sign data will be deleted. The only data which remain
available will be: HR, ST, PVC, and Alarm Histories.
• A message DISCHARGED
and ALL ALARMS OFF will
appear on the display when
the monitor is in a discharged
mode.
• Push the Display On/Off
button to turn the display off.
NOTE: It is recommended to leave the network cable plugged
in and the Dash display on for two minutes following
discharge.
• Store the monitor with the AC
power cord plugged in and
the display off.
To Next Page
Loading...
Need help?
General
