TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM
COVER &
NON-TAB
TRIM
■ SPO
2
— Masimo SET allows the
sensitivity and averaging times
to be adjusted:
• Sensitivity options include:
– Normal, for routine patient
monitoring purposes.
– Maximum for improved low
perfusion performance and
for faster tracking of SPO
2
changes.
– Averaging menu options
determine how many
seconds the collected SPO
2
information is averaged.
Options for averaging times
are: 2, 4, 8, 10, 12, 14, or
16 seconds.
■ Rejuvenating the Adhesive
Properties of the Disposable
Saturation Probe:
• Rejuvenate the probe at least
once per shift and PRN.
• Rub the adhesive sides of the
probes with an alcohol
preparation pad.
• After the probe has dried for
at least one minute, replace it
on the site.
NOTE: It is recommended that the adhesive tapes be changed
with every site change. Adhesive tape can not be rejuvenated.
SPO
2
Menu — Masimo SET Probes
To Next Page
Loading...
