GE DigitalFlow DF868 User Manual

March 2008
1-44 Programming Site Data
Energy Option Prompts 1. Press [F1]-[F4] to select the desired Units for measuring power.
The abbreviations and definitions of all the available power units are
shown in Table 1-17 below. The choices shown on the option bar in
the prompt screen above are determined by the selections made at the
previous System Units prompt screen.
2. Press
[F1]-[F4] to select the desired number of Decimal Digits
(digits to the right of the decimal point) in the power display.
3. Press
[F1]-[F4] to select the desired Units for measuring total
energy.
The abbreviations and definitions of all the available total energy
units are shown in Table 1-18 below. The choices shown on the
option bar in the prompt screen above are determined by the
selections made at the previous System Units prompt screen.
4. Press
[F1]-[F4] to select the desired number of Decimal Digits
(digits to the right of the decimal point) in the total energy display.
When the above selection has been made, the meter will exit the
SYSTM submenu and return to the initial Global PROGRAM screen.
Table 1-17: Power Unit Options
English Power Units Metric Power Units
kBTU—Thousands of British
Thermal Units per Hour
kCAL/sec—Kilocalories/second
MMBTU—Millions of British
Thermal Units per Hour
MCAL/sec—MegaCalories/
second
kW—kilowatts kW—kilowatts
Tons MW—Megawatts
Table 1-18: Energy Unit Options
English Energy Units Metric Energy Units
kBTU—Thousands of British
Thermal Units
kCAL—Kilocalories
MMBTU—Millions of British
Thermal Units
MCAL—MegaCalories
kWHr—Kilowatt-Hours kW—Kilowatt-Hour
Tons MW—Megawatt-Hour

GE DigitalFlow DF868 Specifications

General

Brand	GE
Model	DigitalFlow DF868
Category	Measuring Instruments
Language	English