GE EntelliGuard G - Section 8. Standards and References

DET-653C EntelliGuard
®
G Circuit Breaker Application Guide
24-May-12 Section 7. Physical Data
©2012 General Electric All Rights Reserved
82
EntelliGuard
®
G Power Circuit Breaker
Section 8. Standards and References
Underwriters Laboratories® (UL)
UL 489 and UL 489-SB2 - Standard for Molded Case Circuit
Breakers and Circuit Breaker Enclosures
UL 1066 - Standard for Safety Low-Voltage AC and DC
Power Circuit Breakers Used in Enclosures
Order from:
UL Publication Stock
333 Pfingsten Road
Northbrook, IL 60062 USA
National Electrical Manufactures Association (NEMA)
AB-1/2002 Standards Publication - Molded Case Circuit
Breakers and Molded Case Switches
SG3/1995 - Standards and Ratings for the Application of
Low-Voltage Power Circuit Breakers
SG5/1995 – Power Switchgear Assemblies
Order from:
NEMA Publication
155 East 44th Street
New York, NY 10017 USA
Canadian Standards Association (CSA)
CSA 22.2 NO 5.1 – Standards for Branch Circuit Protection
Order from:
Canadian Standards Association
178 Rexdale Blvd.
Rexdale, Ontario, Canada M9WR3
Institute of Electrical and Electronics Engineers (IEEE)
IEEE 693 – Recommended Practices for Seismic Design of
Substations
Order from:
IEEE
345 East 47th Street,
New York, NY 10017 USA
American National Standard Institute (ANSI)
ANSI C37.13/1990 - Low-Voltage AC Power Circuit Breaker
Used in Enclosures (600-Volt Insulation Class)
ANSI C37.16/2000 - Recommendations for Low Voltage
Power Circuit Breakers and AC Power Circuit Protectors,
Preferred Ratings, Related Requirements, and Application
ANSI C37.17/1990 - American National Standard for Trip
Devices for AC and General Purpose DC Low Voltage
Power Circuit Breakers
ANSI C37.20.1/2000 - Metal-Enclosed Low-Voltage Power
Circuit
Breaker Switchgear
ANSI C37.50/1989 (R1995) – Test Procedures for Low-
Voltage AC
Power Circuit Breakers Used in Enclosures
ANSI/IEEE C37.90.1/1993 - IEEE Standard Surge Withstand
Capability (SWC) Tests for Protective Relays and Relay
Systems
ANSI/IEEE C37.90.2/1993 - Withstand Capability of Relay
Systems to Radiated Electromagnetic Interference from
Transceiver
Order from:
ANSI
11 West 42nd Street,
New York, NY 10036 USA