GE Giraffe Operation And Maintenance Manual

Panda iRes Warmer M1110737 006 © 2007 General Electric Company, all rights reserved2-4
Controller checks
WARNING:
Do not use the warmer in the presence of ammable anesthetics: an explosion hazard
exists under these conditions.
WARNING:
Always connect the warmer directly to a hospital grade wall outlet. Connecting to a power
strip or another piece of equipment may result in power failure errors.
Illustration
Step
Description
1
Make sure the power cord is connected to
the outlet on the unit and to the rated power
supply.
2
Switch on the power at the mains switch
on the back of the unit, and at the standby
switch on the front control panel. Verify the
following:
• All the displays and indicators light
• The software revision appears
• The prompt tone begins

GE Giraffe Specifications

General

Manufacturer	GE Healthcare
Type	Incubator
Humidity Range	30% to 95% RH
Power Supply	50/60 Hz
Model	Giraffe
Features	integrated scale
Control Modes	Air and Skin