GE Giraffe - Using the Serial Data Interface; Using the Nurse Call System Interface

Girae Warmer 3-22
Screen
Step
Description
10
Push the “g/oz” key to toggle the weight dis-
play between “grams” (default) and “ounces”.
Using the Integrated SpO
2
Monitor (optional)
The Girae Warmer can be equipped with its own integrated SpO
2
Monitor that is operated from the
control panel screen.
Refer to the manual supplement on SpO
2
Monitor for setup, check out and use instructions.
Using the Integrated Resuscitation System (optional)
Refer to the integrated Resuscitation System for setup, check out and use instructions in the Bag and
Mask Option, Operation and Maintenance Supplement or the Resuscitation System - T-piece Option
Operation and Maintenance Supplement, depending on your Panda iRes Warmer’s resuscitation
equipment setup.
Mounting Optional equipment
WARNING:
Overloading the shelves and rails can aect the stability of the unit. Always try to evenly
distribute the weight of opyions on both sides of the unit for a more balanced load. Limit the
total load on the rails to 22 kg. Do not mount more that 19 kg to one rail. Do not use more
than one GCX Mount on the rails at one time.
WARNING:
Do not transport with pass through drawer(s) open.