GE Giraffe - Temperature Regulation Alarms

1-17Girae Warmer
Alarms
Illustration
Step
Description
1
2
3
4
1 There are two types alarms:
Low Priority Alarms are indicated by a
blinking red alarm light, a red alarm message
on the central alarm area of the display, and
an intermittent audio tone.
High-Priority Alarms have the same blinking
red alarm light and red alarm message. The
dierence is that the audio tone for high-
priority alarms is continuous.
Alarm features
Feature
number
Description
1
Alarm light
2
Motion sensors
3
Alarm silence key
4
Alarm message
2 To silence the alarm. There are two
methods of silencing the alarm:
1. Press the yellow button at the top of the
control panel.
2. Use the Hands Free Alarm Silence (see
below).
When you silence an alarm, the text
message gets smaller and moves to the top
of the screen and the red alarm light goes
from blinking to solid. When the alarms have
been silenced, the audio tone is temporarily
turned o, but the warmer remains in alarm
status until the alarm condition clears. When
the silence period expires, the audio tone will
resume, but the silence period varies with
the alarm (for greater detail about alarm
priorities and silence periods, see the Alarm
Table at the end of this chapter). If there are
multiple alarms, the text messages alternate
every 2 seconds.