GE Giraffe Operation And Maintenance Manual

Panda iRes Warmer M1110737 006 © 2007 General Electric Company, all rights reserved3-14
Screen
Step
Description
3 Remove the rear bedside panel by pressing
the release button and lifting up on the
panel.
WARNING:
The Panda iRes Warmer and Girae Warmer bedside panels are dierent heights. Use only
the Panda iRes Warmer bedside panels on the Panda iRes Warmer.
Tilting the bed
Illustration
Step
Description
1 The bed tilts twelve degrees to allow feet
up or head up positioning of the baby. The
tilt release is located underneath the foot of
the bed. Grasp both the handle and metal
release in one hand and squeeze. Push down
or lift up on the foot of the bed to the desired
position. Letting go of the release at any
point on the tilt path locks the bed in that
position.

GE Giraffe Specifications

General

Manufacturer	GE Healthcare
Type	Incubator
Humidity Range	30% to 95% RH
Power Supply	50/60 Hz
Model	Giraffe
Features	integrated scale
Control Modes	Air and Skin