GE Giraffe - Raising or Lowering the Bedside Panels

3-11Girae Warmer
Setting the manual temperature alarm
The “Man.Temp Alarm” is a safety mechanism that you can activate whenever you manage the
baby’s temperature in Manual Mode. It provides a selectable alarm set point that will notify you
whenever the baby is getting too hot or too cold, just as the warmer does in Baby Mode.
To activate the alarm in Manual Mode, you must to take the following steps:
Illustration
Step
Description
1
Insert the temperature probe into the probe
jack.
2
Attach the skin temperature probe onto the
baby’s skin.
3
Press the “Menu” soft key on the right side of
the control panel:
a) Press the “Setup” soft key on the
submenu.
b) Press the “Next” soft key on the
submenu.
c) Press the “Man Temp Alarm” soft key
d) In most cases, the “Man Temp Alarm”
soft key will be in the o position. Decide
whether you want a safety notication
of 0.5 or 1.0 °C around the desired baby
temperature.