3-5Girae Warmer
Illustration
Step
Description
7
Place the baby in the bed.
WARNING:
Do not place baby in bed during
Warmup Mode.
8
For Baby Mode operation, connect the skin
temperature probe to the probe jack. In the
Manual Mode, use a probe if you wish to
display the patient skin temperature. See
“Attaching the Skin Temperature Probe” later
in this section.
9
If Baby Mode is desired, press the “Mode” key
to toggle to Baby Mode. Current mode set-
ting, “Manual” or “Baby” mode, is highlighted
in blue on the left side of screen.
To Next Page
Loading...
