GE Giraffe Operation And Maintenance Manual

4-7Panda iRes Warmer M1110737 006 © 2007 General Electric Company, all rights reserved
Cleaning other components
CAUTION:
Do not clean the unit with organic solvents, scouring compounds, strong acids, or strong
bases. These compounds may damage components.
CAUTION:
To minimize the generation of static electricity, do not polish the side panels with a dry
cloth.
CAUTION:
Do not autoclave or gas sterilize any of the plastic parts.
Divide the components according to cleaning methods. Methods other then those detailed in this
section may damage the unit. Always be sure to wipe dry all cleaning agents after cleaning.
Apply the cleaning solutions with a clean cloth or sponge. Dry the parts with a clean damp soft cloth
to avoid scratches.
NOTE: Do not soak parts in cleaning solutions. Always wipe parts dry of all cleaning
solutions. Following these two recommendations will greatly extend the life of the parts.
NOTE: Any parts you clean with iodophor solution will stain yellow.
NOTE: Do not allow excess cleaning solution to seep in between plastic parts (for example:
between the side panels and lock or hinges) where it can not be easily wiped dry with a
cloth.

GE Giraffe Specifications

General

Manufacturer	GE Healthcare
Type	Incubator
Humidity Range	30% to 95% RH
Power Supply	50/60 Hz
Model	Giraffe
Features	integrated scale
Control Modes	Air and Skin