ixGirae Warmer
Scope and intended users
This manual describes the features and operation of the Girae Warmer. The Girae Warmer is used
in hospital delivery rooms, hospital newborn nurseries and neonatal intensive care units (NICU).
The intended users of this manual consists of end users of the equipment, primarily care providers in
infant delivery rooms and NICUs, and hospital biomedical engineering services.
Organization of this manual
The organization of this manual is:
Important Safety Information provides important safety information for the safety of both
the patient and the care providers.
Chapter 1 - Introduction describes the Girae Warmer system and the system’s
indications for use.
Chapter 2 - System Setup and Checkout Procedures describes the procedures to set up and
check out the Girae Warmer prior to use.
Chapter 3 - Operating the Warmer describes the procedures to operate the Girae Warmer.
Chapter 4 - Maintenance and Cleaning provides information on performing maintenance and
cleaning of the Girae Warmer.
Appendix A - Options is a list of options that may be used with the Girae Warmer.
Appendix B - Specications provides information on power requirements and accessory
outlets, standards, operating environment, storage conditions, user control settings,
performance and mechanical specications.
Appendix C - Electromagnetic Compatibility (EMC) provides information on the
Girae Warmer’s electromagnetic emissions and the electronic environment that is
compatible with the use and operation of the Girae Warmer.
Appendix D - Conforming with Standards and Directives provides information on the
European Council Directive and the disposal of electrical/electronic equipment.
Appendix E - Additional Safety Information provides information on IEC 60601-1 3rd edition
requirements
Inside back cover provides a geographically organized list of Datex-Ohmeda service centers.
About this Manual
__________________________________________
To Next Page
Loading...
