Girae Warmer 1-18
Alarms (continued)
Illustration
Step
Description
3 Hands Free Alarm Silence
The motion sensor for the Hands Free Alarm
Silence is located in the alarm light panel.
Silence the alarm by gently waving your
hand approximately 2-6 inches in front of
the sensor.
Silencing an alarm with the Hands Free
Alarm Silence works exactly the same as
pressing the alarm silence button for all
alarms. Using the Hands Free Alarm Silence
will allow you to silence alarms without
touching a panel surface.
WARNING:
Do not block the alarm speaker located on the back of the control panel near the power
outlets. Doing so may interfere with audio alarms.
To Next Page
Loading...
