GE Giraffe - Chapter 5: Repair Procedures

3-23Girae Warmer
Illustration Description
Rail system components mount to the uprights and
provide access to commonly used equipment such
as suction regulators, owmeters, collection bottles,
instrument shelves, etc. This patented design
consists of a dovetail shaped aluminum extrusion
and a positive locking mounting block. Mounting
blocks attach various options to the rail system.
Mounting rail system components.
1. Loosen the mounting screw on the mounting
block.
2. Place the mounting block in position on the rail.
3. Tighten the mounting screw.
Release the rail system component by loosening
the mounting screw.
1
Mounting universal adapter plate.
The Universal adapter plate allows bottle slides and
additional bracket to mount to the rail system.
1. Loosen the two mounting screws (1) on the side
of the adapter plate with the hex key provided
with the plate.
2. Place the adapter plate in position on the rail.
3. Tighten the two mounting screws.
Release the adapter plate by loosening the
mounting screws.