GE Giraffe - Page 81

C-1Girae Warmer
Appendix C
Electromagnetic Compatibility
__________________________________________
Electromagnetic compatibility (EMC) guidance
Safety Standards: IEC 60601-1, IEC 60601-2-19 and IEC 60601-2-21,
EMC Standards: IEC 60601-1-2 2nd ed.
WARNING:
Medical Electrical Equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided below.
WARNING:
Portable and mobile RF communication equipment can aect Medical Electrical Equipment.
Caution should be use when operating such device around Medical Electrical Equipment
WARNING:
This equipment/system is intended for use by healthcare professionals only.
This equipment/system may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take mitigation measures, such as re-orienting
or relocating the equipment/system or shielding the location.
Manufacturer’s guidance and declaration regarding electronic emissions
The Girae warmer is intended for use in the electronic environment specied below. The user of the
Girae warmer should ensure that it is used in such an environment.
Electromagnetic Emissions
Emissions test Compliance Electromagnetic environment guidance
RF emissions
CISPR 11
Group 1 The Girae Warmer uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class A The Girae Warmer is suitable for use in all
establishments, other than domestic and those directly
connected to the public low voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
uctuations/
icker emissions
IEC 61000-3-3
Complies