GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 126 Section 11.0 - AP Assembly Installation
4.) Mount the AP with wall adapter.
5.) Connect the ethernet cable and USB cable with AP.
11.2.2 Shelf/Table placement (not anchored)
Note: Only consider this method when the wall mounting is not permitted, for example lead shielding
might be damaged.
Just place the AP with table adapter onto a table or supporting bracket with the height about
1.5m to 2m. And then connect the ethernet cable and USB cable with AP
To Next Page
Loading...
