GE Healthcare Brivo XR118 - Wireless Architecture

GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Chapter 8 - - Troubleshooting Page 213
Section 3.0
Wireless Architecture
1.) Using scenario for Fix RAD room with monitor and AP.
2.) Wireless SSID and security configuration
• Detector’s default IP is fixedto
3.1.1.30/24.
• AP’s default IP is fixed to
3.1.1.1/24.
• ETH1’s default IP on iServer to
AP is fixed to 3.1.1./24.
• ETH2’s IP on iServer tohospital
LAN is assigned byhospital
network.
• SUIF provide an access for FE
to modify iDR subnet(3.1.x.x)in
case iDR subnet conflicting
with hospital network.
On fixed RAD room
• AP’s SSID=Associate detector’s MAC
• AP’s SSID Encryption=WPA2-PSK
• AP’s SSID Passphrase=Encryption algorithm(detector’s
MAC)
• AP’s SSID broadcast=disabled
Wifi Connection
• On fixed RAD room, detector will connect to AP.