GE Healthcare Brivo XR118 - Chapter 1 - Safety and Service; Section 1.0 Lock-Out & Tag-Out (LOTO); 1.1 System Power

GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Chapter 1 - - Safety and Service Page 23
Chapter 1 - Safety and Service
Section 1.0
Lock-Out & Tag-Out (LOTO)
1.1 System Power
Name of Equipment: System
Number Of Locks: One per person, working on the system
Title(s) of Employees Authorized to Perform LOTO: Those trained in Lockout Tagout (LOTO)
Title(s) of Affected Employees and How to Notify: Hospital Personnel; notified by verbal
communication.
Energy Source Yes/No Location of
Energy Isolat-
ing Means
Magnitude of Energy
Pneumatic Yes System’s Cabi-
net Power Dis-
connect
100-127vac or 200-240vac, Single Phase
Hydraulic No
Gas/Water/Steam No
Chemical No
Mechanical Motion No
Gravity No
Springs No
Thermal No
Stored Energy No
Air Under Pressure No
Oil Under Pressure No
Water Under Pressure No
Gas Under Pressure No
Steam No
Other No
Type(s) of Equipment and/or Method(s) Selected to Dissipate or Isolate Stored Energy: NA
Type(s) of Equipment and/or Method(s) Used to Ensure Disconnection’s:
One Lock & Tag for Main Disconnect