GE Healthcare Brivo XR118 - Chapter 12 - Set Preferences

Chapter 12 - - Set Preferences Page 251
GE H
EALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Chapter 12 - Set Preferences
Preferences will allow a super-user to customize your system for your
facilities needs. It will allow you to predefine your X-ray procedure
parameters so that any stored procedure may be retrieved from memory. This will
allow you to access technique factors programmed for that type of procedure.
This chapter explains the Preferences available to you, and how to activate or
change the preferences for your facility.
This chapter explains how to set the preferences for various features on your
system. You can enable several automatic networking and printing features,
customize your system default annotations, image orientation and preferences
for image processing. You are also able to save commonly used operator and
physician names in your system for later recall.
This section presents the concepts necessary to successfully build and edit
preset procedures to customize your system.
Preferences are set on the Utilities screen (Figure 12-2), which is accessed by
clicking the [ ] button on the Worklist.
Topics covered include:
• General
- Network Connections
- DICOM Printers
• Detector Management
- Detector Registration
- Detector Management
- Detector Sleeping Setting
- Detector Auto-Sensing Setting
• Target System Configuration
• Worklist
- Default Query
- Preset Names
• Image Management
- Copy Exam
- Auto Tag (Quality Check)
- Auto Print
- Auto Send (Auto Push)
- Auto Delete