GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 282 Chapter 12 - - Set Preferences
Auto Send (Auto Push)
Auto Send automatically transfers images to another network device when the
exam is closed. Auto Send is enabled and configured from the Utilities [
] – Preferences screen.
Follow this process to configure Auto Send.
1. From the Worklist screen, click utilities button [ ].
2. Select
Preferences > Image Management.
3. Click Auto Push [Edit].
The Auto Send screen appears.
4. Complete the information as described in Table 12-10.
5. When finished, click [Save] to retain your changes.
Figure 12-25 Auto Send
Table 12-10 Auto Send Functions
Function Description
Auto Send
[On]/[Off]
Turns Auto Send on or off.
Selecting On allows you to configure the default Auto Send
settings.
Network Host
Lists the available network locations where images may be
transferred.
Refer to Network Connections for information about how to
configure the available Network Hosts.
To Next Page
Loading...
