Chapter 12 - - Set Preferences Page 275
GE H
EALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Default Query
The Worklist Default Query controls the amount of HIS/RIS information that
appears on the Worklist and allows you to enable and configure the auto-refresh
function.
1. Complete or edit the Worklist Default Query screen (Figure 12-20).
Table 12-8 describes the fields in detail.
2. Click [Save] to change the Default Query.
Figure 12-20 Worklist Default Query screen
Table 12-8 Worklist Default Query description
Function Description
Show list for
Determines Worklist items by system or modality.
• This system - The local workstation
• CR modality - Computed radiography exams
• DX modality - Digital x-ray exams
• All systems - All imaging systems in the network
Include
Allows you to include or exclude completed or discontinued
exams on the Worklist.
Date Range
Selects the date range of scheduled procedures to show on
the Worklist. Available options are:
•All
• Today
Plus previous
__ Days __ Hours
Shows procedures that are scheduled for the specified time
before the selected date range.
Plus future
__ Days __ Hours
Shows procedures that are scheduled for the specified time
after the selected date range.
To Next Page
Loading...
