GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 276 Chapter 12 - - Set Preferences
Auto Refresh
The Worklist Auto-Refresh feature automatically refreshes the Patient Worklist
at predefined time intervals.
Note: You will not be able to make selections or access Worklist functions while the worklist
is refreshing.
Note: For large facilities, it is recommended that the auto refresh interval be set to a short
time, for example, every 1 or 2 minutes. The system will refresh more often, but each
refresh will take less time to complete.
Auto Refresh
[On]/[Off]
Turns Auto Refresh on or off.
Refresh every __
Minutes
If Auto Refresh is [On], sets how often (in minutes) the
worklist refreshes. The interval may be between 1 and 9999
minutes.
Function Description
To Next Page
Loading...
