Chapter 12 - - Set Preferences Page 279
GE H
EALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Image Management
Image Management preferences allow you to enable and configure the Copy Exam,
Auto Tag, Auto Print, Auto Push, and Auto Delete functions.
Figure 12-23 Preferences - Image Management
Retry The Failed Print During Boot
Should the system be shut down or put into standby before all the designated
images complete printing, the system will automatically start sending the
designated images to the printer upon booting up.
Copy Exam
Enabling the Copy Exam function allows exams to be copied between the local
databases and network hosts. It also allows exams to be copied to a CD/DVD.
There is no configuration for this function; it is either enabled (On) or
disabled (Off).
Follow this process to enable or disable Copy Exam:
1. From the Worklist screen, click utilities button [ ].
2. Select
Preferences > Image Management.
3. Click Copy Exam [On] to enable the function.
Copy Exam [Off] disables the function.
To Next Page
Loading...
