GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 284 Chapter 12 - - Set Preferences
Auto Delete
Auto Delete automatically deletes images when the image database does not have
enough space. Auto Delete is enabled from the Utilities [ ] - Preferences
screen.
Follow this process to configure Auto Delete.
1. From the Worklist screen, click utilities button [ ].
2. Select
Preferences > Image Management.
3. Click Auto Delete [Edit].
The Auto Delete screen appears.
4. Complete the information as described in Table 12-11.
5. When finished, click [Save] to retain your changes.
Figure 12-26 Auto Delete
Table 12-11 Auto Delete functions
Function Description
Auto Delete
[On]/[Off]
Turns Auto Delete on or off.
Run Auto Delete Every
_ Hours
If Auto Delete is [On], sets how often (in hours) the system
auto deletes images.
Auto Delete images
when database is __%
full.
Specifies when to auto delete images based on database size.
To Next Page
Loading...
