GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 258 Chapter 12 - - Set Preferences
Remove Network Host
Follow this process to remove a network host.
1. From the Network Connections screen, select the network host.
2. Click [Remove].
A removal confirm message appears.
3. Click [OK].
[Cancel] closes the message and returns you to the Network Connections
screen without removing the connection.
The network host is removed.
Perform C-Echo Test
Use this function when you want to check to see if the system is communicating
with a particular network host.
1. Select a host from the Network Hosts list.
2. Press [C-Echo Test].
A message appears to notify you if the test passed or failed.
A “Successful” message means that the network host is working and that you
can retrieve exams from it or transfer exams to it.
Failed C-Echo Test
A “Failed” message means that the system could not contact the network host.
Perform the following tasks to resolve the problem.
• Re-try the test at a later time. The host may be temporarily unavailable.
• Confirm the host configuration on the Edit screen.
If the problem persists, contact your technical support group or system
administrator.
To Next Page
Loading...
