GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 34 Section 2.0 - Objective and Scope of this Manual
2.3 Interconnection
Interconnection of products by furnished cables or contractor supplied wiring is indicated by
numbered MIS runs in the installation sections. Run interconnect charts are available, which
describe the connection and function of each wire.
For Brivo XR118 System, refer to the following:
• Brivo XR118 System MIS Map
• Brivo XR118 System MIS Chart
2.4 Presentation
The procedures in this steering manual are presented in job card forms.
To Next Page
Loading...
