GE Healthcare Brivo XR118 - Page 75

GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Chapter 5 - - Installation & Configuration Page 75
9.2 Starting the System Configuration Tool
1.) Log into the XR118 system
a.) Log in as user name: ******
b.) Enter the password: ******
c.) Insert proprietary key CD in workstation USB DVD drive.
2.) From the application desktop, click on the Utilities icon.
3.) Click on [Launch] button.
4.) Click on [Configuration] icon.
5.) In the left frame, click on the page icon associated with the configuration parameter name you
wish to change.
9.3 System Configuration Tool Parameters
9.3.1 Home Page Summary Tab
The Home page Summary information shall display site information, connectivity parameters, and
enabled options.
9.3.2 Site Parameters
The following information can be viewed regardless of service mode. All can be edited, except for
those identified by an asterisk “*” (which require setup by GE personnel).
Table 12-2 Site Parameters
Parameter Definition
Site Name
Name of specific location (Hospital, clinic...) where system is installed (64
characters maximum)
Street Address 1
Address of location system is installed (5 lines, and 64 characters
maximum per line)
Street Address 2
Address of location system is installed (5 lines, and 64 characters
maximum per line)
City
City of location system is installed (5 lines, and 64 characters maximum
per line)
State/Province
State/Province of location system is installed (5 lines, and 64 characters
maximum per line)
Postal Code
Postal code of location system is installed (5 lines, and 64 characters
maximum per line)
Department Name
Department name (i.e. Radiology) responsible for equipment
maintenance (64 characters maximum)
Telephone 64 characters maximum
Fax 64 characters maximum
Contact Person Name
Customer or person responsible for maintenance of equipment. One line,
and 64 characters maximum.
Contact Person Phone Two lines, and 64 characters maximum per line
System ID*
System identifier assigned by GE Healthcare following system installation
and prior to customer turnover. (64 characters maximum)
Installation Date*
Date system installation completed; created by GE Healthcare. (64
characters maximum)