Need help?Do you have a question about the GE LOGIQ 200 PRO Series and is the answer not in the manual?
General| Application | General Imaging |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Transducer Frequency Range | 2.5 MHz - 10 MHz (varies by transducer) |
| Imaging Modes | B-mode, M-mode |
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
States that US law restricts the device's sale or use to a physician's order.
Details the different categories of keys on the control panel, such as Patient Entry and Alphanumeric keys.
Explains the function of the two probe ports and the need to deactivate before disconnecting probes.
Details the process of selecting an exam category and entering patient information via the menu.
Continues the description of B-Mode controls, detailing functions like Combi Focus and Rotation.
Details specific controls for M-Mode, including Zoom, B/M Gain, and Sweep Speed.
Explains using the trackball and arrow keys for cursor movement and text entry during annotation.
Explains the use of Green Shift for accessing foreign language symbols and its locking function.
Instructions for performing distance and tissue depth measurements using the trackball and set key.
Steps to measure circumference and area using the ellipse method for calculations.
Instructions for measuring circumference and area by tracing the outline of an object.
How to perform echo level measurements using a box cursor.
Procedures for measuring time intervals, such as heart rate and time durations.
Steps to measure slope, likely for time-based measurements in M-Mode.
How to temporarily store up to 10 images in system memory for later recall.
Details the use of Record1 and Record2 keys to print images or report pages.
Guidelines for cleaning and disinfecting ultrasound probes after each use.
To Next Page
