Peripherals Installation
LOGIQ C9 Series – Basic Service Manual 3-29
5482298-100 English Rev. 5
Sony UP-D25MD Printer Installation
Tools
No special tools needed.
Manpower
One person 5 min.
Preparations
1. Unpack the Sony UP-D25MD Printer.
Installation Procedure
1. Place the device in a suitable place.
2. Connect power cord and USB Cable on the Printer.
3. Connect the power cord with the AC output on the rear
panel of LOGIQ C9 Series, then turn on the printer.
4. Connect USB cable to LOGIQ C9 Series USB port.
Figure 3-7. Color Printer connection
To Next Page
Loading...
