General Procedures and Functional Checks
4-4 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Overview
Some procedures are used more often than other. The intention
with this section is to keep the most used procedures in one
place.
Contents in this section
• ‘Power ON/Boot Up’ on page 4-5
• ‘Power off’ on page 4-8
• ‘LCD Monitor position adjustment’ on page 4-10
• ‘Logging on to LOGIQ C9 Series as “ADM”’ on page 4-10
• ‘Service Key (Dongle, HASP)’ on page 4-11
• ‘Exit to Windows Desktop from the LOGIQ C9 Series
application software’ on page 4-13
• ‘Removable media’ on page 4-15
• ‘Archiving and loading presets’ on page 4-16
• ‘Download/Upload of System Presets via InSite ExC’ on
page 4-17
• ‘Data Management’ on page 4-17
• ‘Backup’ on page 4-17
• ‘Installation and Setup Procedure for Peripherals’ on
page 4-17
• ‘Moving and transporting the LOGIQ C9 Series’ on
page 4-17
• ‘Recording important settings and parameters’ on page 4-17
• ‘Cleaning the Tracball’ on page 4-19
To Next Page
Loading...
