GE LOGIQ C9 Series - Electrical Specifications

System Setup
3-20 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Electrical specifications
Verification of the system’s voltage setting
Verify that the mains voltage specified for the LOGIQ C9 Series
is available on-site.
The voltage setting for the unit is found on a label near the
Mains Power Circuit Breaker on the rear of the system.
Refer to the latest revision User Manual for a fill list of product
labels.
Electrical specifications for LOGIQ C9 Series
In the table below, the electrical specifications for LOGIQ C9
Series includes monitor and on board peripherals.
WARNING
Connecting a LOGIQ C9 Series to the wrong voltage level will
most likely destroy it.
Table 3-7: Electrical specifications for LOGIQ C9 Series
Part
Number
Description Voltage Tolerances
Power
consumntion
Frequency
5489329 LOGIQ C9 Premium for
China
220-240V ±10% Max.950VA 50/60 Hz
5489330 LOGIQ C9 Expert for
China (with 4D)
220-240V ±10% Max.950VA 50/60 Hz
5489331 LOGIQ C9 Expert for
China
220-240V ±10% Max.950VA 50/60 Hz
5489332 LOGIQ C9 Expert for
India
220-240V ±10% Max.950VA 50/60 Hz