GE LOGIQ C9 Series - Packing the Equipment

System Setup
3-16 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Moving into Position
Please refer to User Manual on how to move the system.
Packing the Equipment
Please pack LOGIQ C9 Series in the reverse order of
unpacking.
10 Remove the wooden ramp and attach it to the
Pallet base on the rear side of the
LOGIQ C9 Series.
11 Pull the LOGIQ C9 Series down the Pallet base
ramp.
Note: Remember to pull the LOGIQ C9 Series
from the back for safer transportation.
12 Remove all the covers and foams from the unit.
13 Place all of the filling inside the Transportation
Box. Close the box, and store the filling for
possible future use.
Table 3-5: Unpacking the LOGIQ C9 Series
Step Description Corresponding Graphic