Block Diagram and Theory
LOGIQ C9 Series – Basic Service Manual 5-3
5482298-100 English Rev. 5
Block Diagram and Theory
General Information
LOGIQ C9 Series is an ultrasound imaging scanner.
The system can be used for:
• 2D Black and White imaging
• 2D Color Flow
• M-Mode Black and White imaging
• Doppler
• A number of combinations of the above
LOGIQ C9 Series is a digital beam forming system that can
handle up to 128 elements linear probes.
Signal flow from the Probe Connector Panel to the Front End, to
the Mid Processors and Back End Processor and finally to the
LCD and peripherals.
System configuration is stored on a hard disk drive and all
necessary software is loaded from the hard disk drive on power
up.
Top Console
The Top Console includes a Standby/On switch, a keyboard,
different controls for manipulating the picture quality, controls for
use in Measure & Analyze (M&A), and loudspeakers for stereo
sound output (used during Doppler scanning).
To Next Page
Loading...
