General Procedures and Functional Checks
4-2 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Overview
Purpose of this chapter
This chapter provides procedures for quickly checking major
functions of the scanner and diagnostics instructions using the
built-in service software.
Contents in this chapter
• ‘Overview’ on page 4-2
• ‘General procedures’ on page 4-3
• ‘Functional checks’ on page 4-21
• ‘Power supply test & adjustments’ on page 4-26
Special Equipment required
To perform these tests, you'll need any of the sector, linear, or
convex probes. (Normally you should check all the probes used
on the system).
To Next Page
Loading...
