System Setup
3-38 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Option Setup
Software Option Installation Procedure
NOTE: Not all features described in this section may be available or
cleared for sale in all markets. Please contact with your local GE
Ultrasound representative to get the latest information.
1. Power on the system.
NOTE: Keep the power cord connection during the installation.
2. After the power-up sequence is complete, select Utility on
the touch panel, and then select Admin in the Utility menu.
3. In System Admin tab, etner the new option keys, then
select Add.
Figure 3-12. Input Option Key
For software Option Installation, the operator must login as
Administrator.
To Next Page
Loading...
Need help?
General
