Peripherals Installation
LOGIQ C9 Series – Basic Service Manual 3-31
5482298-100 English Rev. 5
Footswitch Installation (continued)
Configuring Footswitch
Footswitch supports these configurations: No Function, Rec/
Pause, Freeze, Next Heartcycle, Prev Heartcycle, Print 1, Print
2, Update, Next Step (Scan Assistant), Previous Step (Scan
Assistant), Scan Assistant Pause/Resume or Mark Cine. The
default setting is No Function.
Enter Utility -> Application -> Settings to configure the
Footswitch functions.
Figure 3-9. Configuring Footswitch Functions
To Next Page
Loading...
