Replacement Procedures
8-24 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Reinstall DICOM Devices
Reinstall any DICOM devices used by the customers and check
to ensure these DICOM devices work properly.
The instruction about installing DICOM devices is not
incorporated in this manual. To access the instruction about
installing DICOM devices please refer to another manual Basic
User Manual. Please use the latest revision of this document.
Touch Panel Calibration
After the software upgrade, check if the touch panel works
properly. If the touch panel does not work properly, perform the
touch panel calibration. Please contact GE service
representative to do touch panel calibration.