GE LOGIQ S8 R3 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 5-7 - Hardware Options. 5 - 23
5-7-1-6 FibroScan Touch Panel
Figure 5-15 FibroScan Touch Panel
5-7-1-7 FibroScan Warning indicator
The following indicators display above the elastogram.
Figure 5-16 Warning indicators
Preset Parameter Description
M or XL Press M to activate M+ probe. Press XL to activate XL+ probe.
Note: If only one FibroScan probe is connected, the exam type is
automatically activated when entering the FibroScan mode.
CAP Activate the CAP measurement when the CAP option is installed.
Note: If the CAP option is installed, the CAP button is automatically activated
when entering FibroScan mode.
FibroScan Report Activate FibroScan Report page.
Delete Delete a group of measurements in an exam.
Measurement Move right or left to advance through measurement results.
1.No compatible probe connected
2.Electromagnetic disturbances
3.Calibrate the probe

GE LOGIQ S8 R3 Specifications

General

Brand	GE
Model	LOGIQ S8 R3
Category	Medical Equipment
Language	English