GE MAC 600 SPY

4-30 MAC
TM
600 Revision G
2047426-002
Maintenance: Check out Procedure
Saving Setup
For saving System set up to an SD card, the SD card option need not be
enabled.
1. Select Setup.
2. Enter the setup password 1111.
3. Press Enter.
4. Select Save Setup using the arrow and press the Enter key.
5. Insert the blank SD card without write protection enabled.
6. Select To SD Card using the arrow and press the Enter key.
7. Remove the SD card and press the esc key to return to the System
Setup Menu.
Print Setup
1. Select Setup.
2. Enter set up password 1111.
3. Press Enter.
4. Select Print Setup using the arrow and press the Enter key.
Restoring Setup
From the SD Card:
1. Insert the SD card where Setup is stored.
2. Select Setup.
3. Enter set up password 1111.
4. Press Enter.
5. Select Restore Setup using the arrow and press the Enter key.
6. Select From SD Card using the arrow and press the Enter key.
7. The system will restore set up and return to the System Setup Menu.
Manually restoring the settings :
Refer to the “MAC 600 Operator’s Manual” for instructions on manually
restoring the settings.
Serial Number Entry
1. Select Setup.
2. Enter set up password 1111.
3. Press Enter.
4. Press the Lead and F2 keys together.