Revision G MAC
TM
600 4-11
2047426-002
Maintenance: Preparing System for FRU Replacement
Reworking the Power Supply (Class II to Class I)
The MAC600 Class II Power Supply (PS) FRU P/N 2047328-001 is
obsolete. The new power supply is qualified as Class I and the P/N is
2047328-002. In order to use the Class I power supply in the MAC600,
the safety classification of MAC600 device needs to change from Class II
to Class I .
Depending on the Serial number of the device different levels of rework
are required. See the following table for further details.
NOTE
All MAC 600 shipments to China are Class I. Therefore, further
rework is not required. For China, see
“2066456-001 FRU - Power
Supply Medical Class I (For China Only)” on page 5-9.
Table 4-6. Power Supply Labels
Legend Description
1 Class II Power Supply label
2 Class I Power Supply label
If Serial Number is: Then Perform:
less than or equal to
SF713346059PA
1. “Earth Cable Routing” on page 4-12
2. “Changing the Product Label” on page 4-13
3. Change the Power Supply FRU (P/N
2047328-002).
between SF713346060PA
and SF713496708PA
1. “Changing the Product Label” on page 4-13
2. Change the Power Supply FRU (P/N
2047328-002).
equal to or greater than
SF713500001PA
1. Change the Power Supply FRU (P/N
2047328-002).
To Next Page
Loading...
